Menu
   «   

   «   

POLYX®-OIL PURE


COMMERCIALLY DESIGNED

Osmo Polyx®-Oil Pure is resistant to water and dirt, is extremely durable and smoothens wood surfaces whilst enhancing the natural beauty of the wood character. Solvent-free and under 50 g/L VOC offering an environmentally friendly alternative to professionals. Two coats are applied in one day (wet-on-wet) whereby the finish dries and cures within 8-12 hours!

 
ADVANTAGES
  • Especially fast drying and curing
  • Extremely durable and hard-wearing
  • Water and dirt resistant
  • Enhances the wood's natural character
  • Specifically for commercial use
  • Suitable for all woods including exotic woods
  • Resistant to common spills such as water, juice, tea, soda and wine
  • Resistant to saliva and perspiration, suitable for children's toys
  • Microporous and breathable; finish will not crack, peel or flake
  • Easily spot repairable
RECOMMENDED USE
Osmo Polyx®-Oil Pure is ideal for protecting unfinished wood, OSB, and cork.
SPECS
Approximate coverage: 750 ft2/L with one coat
Number of coats: 2 coats (wet-on-wet)
Application temperature: 40℉ to 95℉
Drying time: Approximately 8-10hrs
Curing time: Approximately 2 weeks Sizes: 1L
 
 
APPLICATION
    Apply two thin coats with an Osmo FloorxCenter® or floor-buffing machine, with green and white pads.

    First Coat: Apply one thin coat with an Osmo Double Sided Scraper, Professional Scraper or other high quality trowel, and Osmo FloorxCenter® or single disc floor-buffing machine.

  1. Stir the Polyx®-Oil Pure well prior to use.
  2. Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar.
  3. Disperse and polish the floor using a floor buffer and green pads.
  4. Allow approximately 35-45 minutes for product to penetrate surface
  5. Proceed immediately to second coat
    Second Coat: Immediately after the first coat of Polyx®-Oil Pure, apply a second thin coat with a trowel and buffing machine.

  1. Trowel the second coat product thinly and evenly onto the floor.
  2. Allow approximately 35-45 minutes for product to penetrate surface.
  3. Disperse and polish the floor, removing excess using a floor buffer and white pads.
  4. There is too much material on the surface when you can see rings. If so, turn the pad over.
  5. Allow 8-10 hours drying time. Allow for good ventilation whilst drying.

  6. If using as a Polyx®-Oil Pure 5125 as a top coat over Polyx® Professional Color Tints, proceed immediately to second-coat. Only one coat of Polyx-Oil is required over top of an Polyx® Professional Color Oil therefore the first coat and its steps are omitted.

    Tip: 13" (330mm) Pads on an Osmo FloorxCenter® will buff approximately 400ft2 before they require either flipping, or replacement.
TOOLS
 

PDF  Product Information

PDF  MSDS


Contact Ivy Hill Supply via email at: dkirby@ivyhillsupply.com

For Sales: 1.888.487.8054
For Technical Support: 1.888.487.8054

1950 6th Avenue South
Seattle, WA 98134 USA

Osmo Holz und Color is accredited according to DIN EN ISO 9001:2000 (quality management system) and DIN 14001 (environmental management system).

In compliance with demands of EURO NORM standard specifications EN 13 and EN 162. Suitable for Children's toys EN71.3, DN 53 1660.