Osmo Polyx®-Oils are derived from natural plant oils and waxes to provide hard-wearing and durable protection for wooden flooring, casework and furniture.

The premise of Osmo Polyx®-Oil is to allow any interior wood surface to retain its natural look and feel. Osmo Polyx®-Oil penetrates deep into the wood protecting the surface from within and providing excellent liquid and abrasion resistance.

  • Extremely durable and hard-wearing
  • Water and dirt resistant
  • Enhances the wood's natural character
  • Resistant to common spills such as water, juice, tea, soda and wine
  • Resistant to saliva and perspiration, suitable for children's toys
  • Microporous and breathable; finish will not crack, peel or flake
  • Easily spot repairable
Osmo Polyx®-Oil Original is ideal for protecting unfinished wood, OSB, and cork.
Approximate coverage: 250 ft2/L with one coat
Number of coats: 2 coats
Application temperature: 40℉ to 95℉
Drying time: 8 - 10hrs
Cure time: Approximately 2 weeks
Sizes: .125L, .75L, 2.5L, 10L
3011 Clear Glossy (Available in .75L only)
3054 Clear Satin-Matte
3055 Clear Matte
  1. First coat on the unfinished wood sanded to specification approximately 250 sf2/L per coat.
  2. Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
  3. Drying time approximately 8 - 10 hours (normal climatic conditions, 72℉/50% rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  4. Second coat approximately 250 sf2/L.
  5. Drying time approximately 8 - 10 hours; see point 3.
  6. Full cure approximately 2 weeks.

PDF  Product Information

PDF  Flooring Application Instructions

PDF  Furniture Application Instructions

PDF  Cost Comparison


Contact Ivy Hill Supply via email at:

For Sales: 1.888.487.8054
For Technical Support: 1.888.487.8054

1950 6th Avenue South
Seattle, WA 98134 USA

Osmo Holz und Color is accredited according to DIN EN ISO 9001:2000 (quality management system) and DIN 14001 (environmental management system).

In compliance with demands of EURO NORM standard specifications EN 13 and EN 162. Suitable for Children's toys EN71.3, DN 53 1660.