Menu
   «   

   «   

POLYX®-OIL EFFECT


ALMOST INVISIBLE PROTECTION

Osmo Polyx®-Oils are derived from natural plant oils and waxes to provide hard-wearing and durable protection for wooden flooring, casework and furniture.

Osmo Polyx®-Oil 3041 is designed to retain the natural appearance of unfinished light woods by using a small amount of white pigment to neutralize the ambering effect that develops after the application of a clear finish.

 
ADVANTAGES
  • Light colored wood retains its natural appearance
  • Nearly invisible protection, no "permanent wet effect".
  • Suitable for wood and other microporous surfaces.
  • Resistant to saliva and perspiration, suitable for children's toys.
  • Resistant to coffee, wine and soda.
RECOMMENDED USE
Osmo Polyx®-Oil Effect Natural is nearly invisible. It is excellent protection for light colored interior wood surfaces.
SPECS
Approximate coverage: 250 sf2/L with one coat
No. of coats: 2 coats
Application temperature: 40℉ to 95℉
Drying time: 8 - 10hrs
Cure time: Approximately 2 weeks
Sizes: .75L
TONE

3041 Natural Transparent
 
 
APPLICATION
    1st coat Polyx®-Oil Effect Natural, 2nd Osmo Polyx®-Oil
  1. First coat on the unfinished wood sanded to specification approximately 250 ft2/L per coat.
  2. Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
  3. Drying time approximately 8 - 10 hours (normal climatic conditions, 72℉/50% rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  4. Second coat approximately 250 ft2/L.
  5. Drying time approximately 8 - 10 hours; see point 3.
  6. Full cure approximately 2 weeks.
TOOLS
 

PDF  Product Information

PDF  MSDS


Contact Ivy Hill Supply via email at: dkirby@ivyhillsupply.com

For Sales: 1.888.487.8054
For Technical Support: 1.888.487.8054

1950 6th Avenue South
Seattle, WA 98134 USA

Osmo Holz und Color is accredited according to DIN EN ISO 9001:2000 (quality management system) and DIN 14001 (environmental management system).

In compliance with demands of EURO NORM standard specifications EN 13 and EN 162. Suitable for Children's toys EN71.3, DN 53 1660.